Television
UHF antenna amplifier
This amplifier circuit is used to amplify TV signals in UHF range. It uses a low-noise transistor and gives 10 to 15 dB amplification in the frequency range from 400 MHz to 850 MHz.
The transistor must be shielded from the input components and in constructing this circuit, the wirings must be as short as possible. [...]
Simple cable tv amplifier
This cable tv amplifier is a rf-amplifier designed to be quickly installed between two coaxial cables. Both input and output impedances are compatible with 75 Ω cables.
The main amplifier si T1 transistor, T2 is working as an emitter follower. The feedback bias is determined by R3 and R4. The total gain of this tv cable [...]
CGA / SCART adapter
CGA adapter / SCART has great advantages as it does not require separate power source and that uses very few external components, which can be easily adapted in the SCART connector. The signals from R, G and B pins of the CGA’s board are converted from TTL levels to SCART levels with [...]
